STONECRETE LIQUID RELEASE
200-250ml per square metre
Drum - 5lt
Ready-to-use product, in liquid and transparent form, from a specially formulated solvent-based mix. It acts as a release agent between STONECRETE Elastic Moulds and concrete/ plaster surface during the stamping procedure. It can be applied by spraying or brush depending on the conditions and the scale of the application surface.
ApplicationFor Stamped Concrete Flooring System: after the application of STONECRETE Colour Hardener on the concrete surface and when the laid concrete reaches its plastic state, we apply the STONECRETE Liquid Release by spraying on the concrete surface, in the direct area from which the stamping will begin - do not spray the entire concrete surface at once as in large area there is the possibility of the evaporation of the product before the beginning of the stamping procedure. It must get evenly sprayed on the concrete surface, on one coat, followed immediately by the application of STONECRETE Elastic Moulds on the concrete surface in order for the stamping procedure to begin. For better results spray a small quantity on the surface of the STONECRETE Elastic Moulds. Repeat the procedure to the remaing area of the concrete surface. The applied quantity of the Liquid Release on the Elastic Mould surface must be renewed after every 2-3 times of its application on the concrete surface, For Stamped Plaster Technology and in cases of stamping in indoor spaces where we wish to minimize any staining from the construction works, after covering the vertical surface with the STONECRETE Plaster mix and when it reaches its plastic state, we apply the STONECRETE Liquid Release on the surface of the chosen STONECRETE Elastic Mould. The product can be applied on the Elastic Mould by controlled spraying or by brush. Subsequently, the Elastic Mould is being applied on the Plaster surface and the stamping procedure begins. The applied quantity of the Liquid Release on the Elastic Mould surface must be renewed after every 2-3 times of its application on the Plaster surface.
- Very easy to use.
- Suitable for narrow or indoor spaces where dust and staining from the construction works must be kept to a minimum.
- It does not require removal / washing as it evaporates on its own.
- It leaves no residue on the application surface.
Colors - Shades
Security Data Sheet
Please contact our company in order to receive the product's safety data sheet